Fiber Ball Packing

Fiber ball packing is made of fibers tied together into a spherical packing, which has the advantages of good elasticity, not floating on the water surface, large voids, long working period, small head loss, etc., compared with the traditional steel packing.

Share With:

Product Introduction

Fiber ball packing is a spherical packing made of fibers tied together, which has the advantages of good elasticity effect, not floating on the water surface, large gap, long working period, small head loss, etc. compared with the traditional steel packing.In the filtration process, the filter layer void along the direction of the water flow gradually becomes smaller, more in line with the ideal filler from the upper large under the small porosity distribution, thus forming a fast filtration speed, large capacity of intercepting dirt, good filtration effect, can be renewable and repeated use, do not have to be replaced all the time, saving time and effort and other advantages.Fiber ball packing can retain the tiny suspended matter which is not easy to be removed by precipitation. Fiber ball packing filtration speed is 3.5 times higher than traditional sand packing, fiber ball packing can be regenerated by backwashing, and automated management can be realized, the general filtration speed is 30m/h, the rough filtration inlet water is 100mg/l, and the outlet water is SS ≤5mg/l, the fine filtration inlet water is 20mg/l, and the outlet water is ≤2mg/l.Fiber ball packing is widely used in the oilfield, chemical, electric power, metallurgy and other industries, high standard water; circulation, bypass filtration and wastewater recycling, fiber ball packing refers to the material installed in the filling tower, in the chemical products, filler, also known as filler, is used to improve the processing performance, the mechanical properties of the product and/or reduce the cost of solid materials.

Product Specification:Ф30-50mm,1 cubic meter = 80kg

Physical Property

Analyzing Project

Testing data

Testing Project

Testing data

Density

1.38 g/m3

Taint Load

6-10 kg/m3

Filling density

75-85 kg/m3

Ball diameter

30-40 mm,40-50 mm

Filtration rate

20-85m/h

Sphere Appearance

White globular, elliptical

Porosity

96 %

 

 

Send Message

Home Tel Mail Inquiry