Polyferric Sulfate

1. New type, high quality, high efficiency ferric salt inorganic polymer flocculant;

2. Excellent coagulation performance, dense alum flower, fast settling speed;

3. Excellent water purification effect, good water quality, does not contain aluminum, chlorine and heavy metal ions and other harmful substances, and no iron ions in the water phase transfer, non-toxic, harmless, safe and reliable;

4. Remove turbidity, decolorization, degreasing, dehydration, sterilization, deodorization, algae removal, removal of COD, BOD and heavy metal ions in the water and other efficacy is remarkable;

5. Adapt to the water PH value range of 4-11, the best PH value range of 6-9, the PH value and total alkalinity of the purified raw water have small changes and are less corrosive to the treatment equipment;

6. It has significant effect on the purification of micro-pollution, algae, low-temperature and low-turbidity raw water, and it is especially effective in the purification of high-turbidity raw water;

7. Less dosage, low cost, treatment cost can save 20%-50%.

1. Printing and dyeing wastewater treatment, instead of the traditional low molecular iron salt and aluminum salt coagulant, relative to the traditional coagulant dosage, coagulation efficiency is low, there are aluminum ions and other residual easy to cause secondary pollution, the polymerization of ferric sulfate dosage of 150 ppm or so, its dosage is small, the removal rate of COD and chromaticity is high, and the optimal ph condition is 8.

2. Electroplating wastewater treatment, can be used as coagulant and complex breaker. Complexes are mainly copper-ammonia complexes, which are stable in nature, pH=11, and difficult to precipitate directly with alkali, polyaluminum and other coagulants. It can also be used as water reuse.

3. Paper wastewater treatment, instead of polymerized aluminum chloride, aluminum sulfate, etc., used as a coagulant, can also be used as paper sludge dewatering, paper wastewater treatment, white water recycling process can not be used in the polymerization of ferric sulfate (polymers containing strong cations), can only be used with polymerized aluminum chloride.

This product is widely used in the purification and treatment of drinking water, industrial circulating water and industrial wastewater of chemical industry, petroleum, mining, papermaking, printing and dyeing, brewing, iron and steel, gas and other industries, and it can achieve good effect on different kinds of water sources in different areas.When used, the liquid ferrous sulfate is generally formulated into 10% - 50% aqueous solution (can be directly added when the turbidity of the source water is high), and the solid ferrous sulfate is formulated into 10% - 30% aqueous solution, and then according to the specific circumstances, the formulated solution is put into the better conditions and amount of drugs, and a better coagulation effect can be obtained after sufficient mixing.